Woodworking machinery: MTS wood grinders
The "MTS" line single-shaft grinders are machines that are suitable to crush wooden chips and their derivatives that have no large-sized foreign bodies.
The material to be ground is inserted in a reception hopper positioned in the upper part of the machine and this supplies the machine.
The rotor is powered by a thrust controlled by a hydraulic piston or a current relay. The rotor is equipped with a series of special utensils contrasting with a counterblade that chops up the material.
The size of the grill's hole determines the sizing of the output material.
| Model | Power installed on the Rotor Kw | Length of cut (mm) | Hopper size (mm) | Hopper capacity m³ | Grill hole (mm) | Production Kg/h approx. | Approx. weight Kg |
| MTS 75/30 |
30 - 37 | 5 - 60 | 700x1200 | 0,8 | Ø 25 | 200 - 450 | 1300 |
| MTS 100/30 | 37 - 45 | 5 - 60 | 900x1200 | 1,3 | Ø 25 | 350 - 700 | 1950 |
| MTS 125/30 | 45 - 55 | 5 - 60 | 1200x1200 | 1,8 | Ø 25 | 600 - 950 | 2100 |
| MTS 160/55 | 75 - 110 | 5 - 60 | 1500x3000 | 6,5 | Ø 25 | 1500 - 4500 | 6500 |
| MTS 210/55 | 110 - 132 | 5 - 60 | 2000x4000 | 12,0 | Ø 25 | 3500 - 6000 | 9500 |
On request: material extraction spiral conveyor from grinders, iron separator with magnet, control board, complete and customised grinding machines.
Picture gallery
